Capture Every Moment with our High-Quality 2CH Dash Cam and Save an Extra $50 with the code 'Extra50'!

Your Cart is Empty

3M VHB Adhesive Tap & Window Film

How to install the static windshield cling?

  1. Clean the surface of the windshield before installation.
  2. Peel off the Red label from the film to expose the static cling surface. Attach the film to your car's windshield, making sure it is smooth and free of bubbles.
  3. Peel off the Black label protective film from the mount and attach the dash cam to the static cling film on the windshield.
  4. Press the camera body firmly for about 30 seconds to ensure a secure attachment.

Mounting Tips:

  1. Remove any previously used adhesive tape from the base surface of the dash cam mount.
  2. Ensure that the base surface is clean and dry before proceeding.
  3. Peel off the yellow sticker from the adhesive pad, exposing the sticky side.
  4. Carefully place the adhesive pad on the base of the dash cam mount, ensuring proper alignment and contact. Remember, the 3M VHB adhesive pad is for one-time use, so please seal and preserve any unused portions.
  5. Press firmly on the adhesive pad to ensure a secure bond.
  6. Let the adhesive pad bond with the surface by avoiding any movement or disturbance for approximately 2 hours. The longer the adhesive time, the stronger the viscosity will be.
  7. Once the adhesive has set, verify the stability and secure attachment of the dash cam mount before use.
Item is added to cart